Candidly Kate: ˚tutorial˚ Free Hand Quilting

Have you ever made a quilt and had it quilted at a shop. It is so expensive.

Did you know that instead, you can quilt it yourself? On the sewing machine you already have?

Wahoo!! (Get prepared for an arm workout...literally.)

So...you have finished the top of your quilt. Now what?

Well, first I would suggest trying to stipple a smaller project just for practice before doing your quilt. That way you will be much more comfortable when you stipple your pride and joy.

Also, I have to say that this method uses lots of safety pins. I have heard that some people use quilting spray adhesive which works well too. For me, safety pins are cheaper...so I use them.

Here's what you do:

First, find a large open space and lay the backing of your quilt flat. You want the wrong side up. (Which means the right side--or the one you want to see when its finished--would be facing the floor.)

Next, lay your batting on top of the backing. Flatten it out as best as you can.

Next, lay the top of your quilt on the batting with the right/pretty side facing up. As you can see, we are building the quilt the way we will want it to look when we are done.

Double check that your backing and batting are sticking out farther than the top of your quilt. If not, try again. This is really important!

Once you have adjusted your layers and everything is laying as flat a possible, grab a whole bunch of safety pins. You will want to pin about every 4-6 inches depending on what you are comfortable. When pinning, make sure you catch all three layers (and not the carpet). Smooth and straighten the layers as much as you need to get everything as flat as possible. Start in the middle...

...and work your way out, tugging softly on each layer to make sure it is flat.

And keep pinning....and pinning.....and pinning until your blanket looks something like this:

This is a good time to double check that the bottom layer and the batting are bigger than (and reaching over the edge) of the top.

When you flip it over, I guarantee that the bottom will not look as straight and flat as the top. That's okay. Just do your very best to make sure the layers are as flat as possible.

In order to stipple with free hand quilting, you need a free hand quilting foot. Mine looks like this:

You also need to drop the feed dogs (the little teeth-like bar underneath your sewing foot that grabs the fabric and pulls it through while you sew).

You may have to look in your sewing machine manual to figure out how to drop the feed dogs. On my machine, I just push a button. Some machines don't have a way to drop the feed dogs, but they have a metal plate that you attach so that the feed dogs aren't touching the fabric. Either way, when they are dropped, they will look something like this:

If you have a little sewing table that attaches to your machine and gives you more surface area to work on, you will definitely want to use it. It really helps,

You want to take your quilt and roll it up until you get to the center. You will start quilting in the center and work outwards. You never want to have more than 1/2 of the quilt rolled up (it gets a little squishy as you can imagine). Put the rolled portion in your machine like this:

Now, drop your sewing foot like this:

At the beginning of the stitch, instead of back stitching, just stitch a few stitches in the same place before moving your fabric. This will secure it. Start making loopy patterns around your quilt. You will want to double check that the fabric underneath is laying nice and flat. Don't stitch over any safety pins, just stipple your way around them.

The trick to stippling is to try and keep the speed of the stitch the same, and the speed of your hands moving the quilt around the same so that the stitch length on the quilt is fairly constant (this is really hard....so don't get discouraged if you have some long stitch lengths and some that are short).

When you need to readjust the fabric (which is pretty often), drop your needle into the fabric so it holds while you are moving things around. Again, make sure that bottom layer is nice and flat.

As you go, you will have two hands (one of mine had to take the picture) on the side of the quilting foot moving the fabric around as you go. This is where the arm workout comes in. Seriously.

And as you go, this is what your quilt will start to look like.

If you ever come across a long piece of thread coming out of the machine without catching, it means that your bobbin is empty. Put more thread on it, and start again. Just start a little bit (1/4 inch) before the thread stopped and stitch a few stitches in one place to secure it. And keep on stippling....

When you are finished, you should have stippled every last part of your quilt. Good job! (I hope your arms aren't killing you).

Go through and trim up all the loose threads.

Then remove all the safety pins.

And don't be surprised if you find a few places where the bottom wasn't laying quite flat. Once you wash and use the blanket, they aren't as noticeable. Trust me!